HASAN NABIL MOH'D KATKHUDA

Hasan Nabil Moh'd Katkhuda	Professor
Civil Engineering- Structural Engineering	Constructions
Faculty of Engineering	Department of Civil Engineering
hasan@hu.edu.jo	http://staff.hu.edu.jo/hasankatkhuda
ORCID ID :
Office No. : E 3006	EXT : 4806

C.V. Document file as PDF:

Ph.D.	The University of Arizona	The United States of America,2004
Master	University of Jordan	Jordan,2000
Bachelor	Jordan University for Science and Technology	Jordan,1997

•	Structural Health Monitoring
•	Structural Engineering
•	System identification
•	Concrete Technology

 Publications in Refereed Journals:

Mu’tasim Abdel-Jaber, Nasim Shatarat, Hasan Katkhuda, Hebah Al-zu’bi, Rawand Al-Nsour, Rouzan Alhnifat, Ahmad Al-Qaisia (2023), Influence of Temperature on Shear Behavior of Lightweight Reinforced Concrete Beams Using Pozzolana Aggregate and Expanded Polystyrene Beads. CivilEng. 4 (3), pp.1036-1051.
https://doi.org/10.3390/civileng4030056

1. Abdel-Jaber M., Abdel-Jaber M.S., Katkhuda H., Shatarat N., Sulaiman A., El-Nimri R. (2022) "Influence of Stirrups Spacing on the Strengthening and Rehabilitating of RC T-beams Using Near Surface Mounted Carbon Fiber Reinforced Polymer Strips." Fibers, 10(12), 103; https://doi.org/10.3390/fib10120103 .

2. Shatarat N., Katkhuda H., Ayyoub M., Al-Hunaiti Y., AbdelJaber M.S (2022), "Improving Bond Strength of Recycled Coarse Aggregate Concrete Using Chopped Basalt Fibers." Case Studies in Construction Materials, Elsevier, vol. 17, e01449. https://doi.org/10.1016/j.cscm.2022.e01449 

3. Al-zu’bi H., Abdel-Jaber, Katkhuda H. (2022), “Flexural Strengthening of Reinforced Concrete Beams with Variable Compressive Strength Using Near Surface Mounted Carbon Fiber Reinforced Polymer Strips [NSM-CFRP]”, Fibers, 10(10), 86; https://doi.org/10.3390/fib10100086 


4. Alzaben G., Shatarat N., Katkhuda H. (2022), “Comparison of capacity curves of reinforced concrete buildings using ADINA moment-curvature element and SAP2000 lumped plasticity model” Mechanics Based Design of Structures and Machines, an international journal. Taylor and Francis. https://doi.org/10.1080/15397734.2022.2126984

5. 	Saleh E., Tarawneh A., Katkhuda H. (2022),"A Comprehensive Evaluation of Existing and New Model-identification approaches for Non-destructive Concrete Strength Assessment". Journal of Construction and Building Materials, Elsevier, vol. 334, 127447. https://doi.org/10.1016/j.conbuildmat.2022.127447 

6. Abdel Jaber M.S., Abdel Jaber M., El-Nimri R., Katkhuda H. (2022), "Investigation of Flexural Capacity of Normal and Recycled Aggregate Concrete Filled Steel Tubes". The Open Civil Engineering Journal, vol. 16. DOI: 10.2174/18741495-v16-e2202020 

7.Beramly M., Abdel Jaber M., Katkhuda H., Shatarat N., Al-diseet M. (2022), "Shear Strengthening and Rehabilitating of Reinforced Concrete T-Beams Using Eternally Carbon Fiber Reinforced Polymer Sheets. Journal of Applied Engineering Science. Vol. 20, No. 2, 956, 498-510. https://doi.org/10.5937/jaes0-34390

8.Abdel-Jaber M., Abdel-Jaber M.S., Katkhuda H., Shatarat N., El-Nimri R. (2021),"Influence of Compressive Strength of Concrete on Shear Strengthening of Reinforced Concrete Beams with Near Surface Mounted Carbon Fiber-Reinforced Polymer", Buildings, 11(11), 563. https://doi.org/10.3390/buildings.11110563
 
9. Arabiyat S., Abdel Jaber M., Katkhuda H., Shatarat N. (2021),"Influence of Using Two Types of Recycled Aggregates on Shear Behavior of Concrete Beams", Journal of Construction and Building Materials, Elsevier, volume 279,  122475.
https://doi.org/10.1016/j.conbuildmat.2021.122475

10.	Abedalqader A., Shatarat N., Ashteyat A., and Katkhuda H. (2021)," Influence of Temperature on Mechanical Properties of Recycled Asphalt Pavement Aggregate and Recycled Coarse Aggregate Concrete, Journal of Construction and Building Materials, Elsevier, volume 269,  121285.

11. Shatarat N., Hunifat R., Murad Y., Katkhuda H., and Abdel Jaber M. (2020)," Torsional Capacity Investigation of Reinforced Concrete Beams with Different Configurations of Welded and Un-Welded Transverse Reinforcement", Structural Concrete Journal, Volume 21, No. 2, pp. 484-500.

12. Shatarat N., Abde Alhaq A., Katkhuda H., and Abdel Jaber M. (2019)," Investigation of axial compressive behavior of reinforced concrete columns using Recycled Coarse Aggregate and Recycled Asphalt Pavement aggregate", Journal of Construction and Building Materials, Elsevier, Volume 217, pp. 384-393.
DOI: https://doi.org/10.1016/j.conbuildmat.2019.05.085

13. Katkhuda H., Shatarat N., and  AL-Rakhameen A. (2019)," Improving the Torsional Capacity of Reinforced Concrete Beams with Spiral Reinforcement",  International Journal of Structural and Civil Engineering Research, Vol. 8, No. 2, pp. 113-118.

14.  Al Qablan H., Rababeh S., Katkhuda H., and Al-Qablan T. (2019), "On the Use of Wooden Beams as Anti-Seismic device in Stone Masonry in Qasr el-Bint, Petra, Jordan", Journal of Building Engineering, Elsevier, Volume 21, pp. 82-96.
DOI: https://doi.org/10.1016/j.jobe.2018.10.002

15.  Shatarat N., Mahmoud H., and Katkhuda H. (2018)," Shear Capacity Investigation of Self Compacting Concrete Beams with Rectangular Spiral Reinforcement", Journal of Construction and Building Materials, Elsevier, Volume 189, pp. 640-648.
DOI: https://doi.org/10.1016/j.conbuildmat.2018.09.046

16.  Shatarat N., Katkhuda H., Hyari K., and Asi I. (2018)," Effect of using recycled coarse aggregate and recycled asphalt pavement  on the properties of pervious concrete ", Structural Engineering and Mechanics: an International Journal, Techno press, Volume 67, No. 3, pp. 283-290.
DOI: https://doi.org/10.12989/sem.2018.67.3.283

17.  Dwairi H., Al Qablan H., and Katkhuda H., (2018)," Shear strength modelling of deep beam reinforced with high-strength steel without stirrups", Proceedings of the Institution of Civil Engineers - Structures and Building, Volume 171, No. 4, pp. 338-347.
            DOI: https://doi.org/10.1680/jstbu.17.00009

18.  Tarawneh Z., Hyari H., and Katkhuda H. (2017),"Evaluating the Characteristics of Multiyear Extreme Droughts in Semi-Arid Regions", Environmental Processes, Springer, Volume 4, No.3, pp. 683-696.
DOI:  https://doi.org/10.1007/s40710-017-0246-7

19.  Katkhuda H., Shatarat N., and Hyari K.(2017)," Damage Detection in Steel Structures with Semi-rigid Connections Using Unscented Kalman Filter", International Journal of Structural Integrity, Emerald Group Publishing Limited, Volume 8, No. 2, pp. 222-239.
DOI: https://doi.org/10.1108/IJSI-04-2016-0014

20.  Katkhuda H., Shatarat N. (2017), "Improving the Mechanical Properties of Recycled Concrete Aggregate Using Chopped Basalt Fibers and Acid Treatment ", Journal of Construction and Building Materials, Elsevier, 140, pp. 328-335.
DOI: http://dx.doi.org/10.1016/j.conbuildmat.2017.02.128

21.  Katkhuda H., Shatarat N., and Hyari K.(2017)," Effect of Silica Fume on Mechanical Properties of Concrete Containing Recycled Asphalt Pavement", Structural Engineering and Mechanics: an International Journal, Techno press, Volume 62, No. 3, pp. 357-364.
DOI: http://dx.doi.org/10.12989/sem.2017.62.3.357

22.  Katkhuda H., Shatarat N., and Hyari K. (2017),"Two Stage System Identification Approach for Three Dimensional Structural Systems", International Journal of Structural Engineering, Inderscience publisher, Volume 8, No.2, pp. 93-110.
DOI: https://doi.org/10.1504/IJSTRUCTE.2017.084628

23.  Katkhuda H., Shatarat N. (2016), "Shear Behavior of Reinforced Concrete Beams using treated Recycled Concrete Aggregate", Journal of Construction and Building Materials, Elsevier, 125, pp.63-71.
DOI: http://dx.doi.org/10.1016/j.conbuildmat.2016.08.034

24.  Hyari K., Khelifi A., and Katkhuda H. (2016),"Multiobjective Optimization of Roadway Lighting Projects", Journal of Transportation Engineering, ASCE, Volume 142, No. 7.
DOI: http://dx.doi.org/10.1061/(ASCE)TE.1943-5436.0000853 

25.  Hyari K., Tarawneh Z., and Katkhuda H. (2016), "Detection Model for Unbalanced Pricing in Construction Projects: A Risk-Based Approach", Journal of Construction Engineering and Management, ASCE, Volume 142, No. 12.
DOI: http://dx.doi.org/10.1061/(ASCE)CO.1943-7862.0001203 

26. Nasim Shatarat, Hasan Katkhuda, Mu’tasim Abdel-Jaber, Maha Alqam (2016)," Experimental Investigation of Reinforced Concrete Beams with Spiral Reinforcement in Shear",  Journal of Construction and Building Materials, Elsevier, 125, pp.585-594.
DOI: http://dx.doi.org/10.1016/j.conbuildmat.2016.08.070

27. Katkhuda H. (2013), "A Time Domain Approach for Identifying Dynamic Forces Applied on Structures", Jordan Journal of Civil Engineering, Volume 7, No. 3, pp. 259-269.

28.  Hanayneh B., Shatarat N., and Katkhuda  H.(2012),“Improving Durability of Concrete to Phosphoric Acid Attack”,  Jordan Journal of Civil Engineering, Volume 6, No. 1, pp. 68-82.

29. Katkhuda H., Dwairi H., and Shatarat N. (2010), “System Identification of Steel Framed Structures with Semi-rigid Connections", Structural Engineering and Mechanics, Techno press, Volume 34, Number 3, pp. 351-366.

30. Katkhuda  H., Hanayneh B. and Shatarat N. (2010), “Effect of Microsilica and Water proofer on Resistance of Concrete to Phosphoric Acid Attack”,  Jordan Journal of Civil Engineering, Volume 4, No. 4, pp. 426-438.

31.  Shatarat N., Hanayneh B. and Katkhuda H (2010), “An Analytical Approach of the Behavior of Fiber Reinforced High Shrinkage Materials”, Journal of Applied Sciences, Volume 10, No. 15, pp. 1580-1587.

32.  Shatarat N., Al-Sadder S., Katkhuda, H., Qablan H. and Shatnawi A. (2009), "Behavior of a Rhombus Frame of Nonlinear Elastic Material under Large Deflection", International Journal of Mechanical Sciences, Elsevier, (51), pp. 166-177.

33.  Katkhuda, H., Shatarat N. and  Qablan H. (2009), "Damage Detection at Element Level in Structures with Different Support Conditions", Journal of Applied Sciences, Volume 9, No.21, pp. 3906-3911.

34. Husam Al Qablan, Hasan Katkhuda and Hazim Dwairi (2009), "Assessment of the Buckling Behavior of Square Composite Plates with Circular Cutout Subjected to In-Plane Shear", Jordan Journal of Civil Engineering, Volume 3, No. 2, pp. 184-195.

35.  Haldar A., Martinez-Flores, R., and Katkhuda, H. (2008), "Crack Detection in Existing Structures Using Noise-Contaminated Dynamic Responses", Theoretical and Applied Fracture Mechanics Journal, Elsevier, (50), pp. 74-80.

36.  Martinez-Flores, R., Katkhuda, H., and Haldar, A. (2008), “A Novel Health Assessment Technique with Minimum Information: Verification,” International Journal of Performability Engineering, Vol. 4, No. 2, pp. 121-140.

37.  Katkhuda, H., and Haldar, A. (2008), “A Novel Health Assessment Technique with Minimum Information,” Structural Control and Health Monitoring Journal, Vol. 15, No. 6, pp. 821-838.

38.  Katkhuda, H., and Haldar, A. (2006), "Defect Identification under Uncertain Blast Loading," Optimization and Engineering Journal, Vol. 7, No. 3, pp. 277-296.

39.  Katkhuda, H., Flores, R.M., and Haldar, A. (2005), "Health Assessment at Local Level With Unknown Input Excitation," Journal of the Structural Engineering, ASCE, Vol. 131, No. 6, pp. 956-965.

40.  Katkhuda, H., Flores, R.M., and Haldar, A. (2004), "A Novel Defect Identification And Structural Health Assessment Technique," Journal of Structural Engineering, Special issue on Advances in Health Monitoring/Assessment of Structures including Heritage and Monument Structures, Vol. 31, No. 1, pp. 1-8.

International Conferences:

1.	Katkhuda H., Shatarat N., and AL-Rakhameen A.," Improving the Torsional Capacity of Reinforced Concrete Beams with Spiral Reinforcement",  6th International Conference on Civil and Urban Engineering (ICCUE 2019), Leuven, Belgium.

2.	Katkhuda H., Hanayneh B. and Shatarat N.," Influence of Silica Fume on High Strength Lightweight Concrete", International Conference on Civil and Environmental Engineering (ICCEE'09), Venice, Italy, 28-30 October 2009, pp. 398-405.

3.	Katkhuda, H., Martinez-Flores, and Haldar, A., “A Novel Structural Health Assessment Technique using Noise-Contaminated Limited Response Information,” 10th International Conference on Structural Safety and Reliability (ICOSSAR'09), Paper No. ICOSSAR2009: 0058, 2009.

4.	Haldar, A., Katkhuda, H., and Martinez-Flores, R., “Structural Health Assessment at the Element Level,” International Conference Mesomechanics, Giza, Egypt, January 28 – February 1, 2008, Paper No. M-46. 

5.	Katkhuda, H., Shatarat N., and Abdel-Jaber M., "System Identification in Plane Steel Frames with Semi-Rigid Supports," 6th International Conference of Steel and Aluminum Structures (ICSAS'07), Oxford, UK, 24-27 July, 2007, pp. 915-922.

6.	Al-Sadder S.Z., Othman R.A, Shatanawi A.S., Abdel-Jaber M.T., Katkhuda H.N, and Ahmed N., " Dynamic Behavior of Slender Beams Under Large Deflection by Method of Characteristics", 6th International Conference of Steel and Aluminum Structures (ICSAS'07), Oxford, UK, 24-27 July, 2007, pp. 254-265.

7.	Haldar, A., Martinez-Flores, R., and Katkhuda, H., “Verifications of a Novel Structural Health Assessment Technique,” 10th International Conference on Applications of Statistics and Probability (ICASP10-2007), Japan, 2007.

8.	Haldar, A., Martinez-Flores, R., and Katkhuda, H., “Health Assessment of Structures under Uncertainty,” Health Monitoring of Structure, Material & Environment, Southeast University, Nanjing, China, October 16-18, pp. 195-201, 2007.

9.	 Martinez-Flores, R., Haldar, A., and Katkhuda, H., “Issues in Kalman Filter-based Damage Evaluation at the Element Level without Excitation Information,” World forum on Smart Materials and Smart Structures Technology (SMSST’07), Chongqing and Nanjing, China, May 22-27, 2007.

10.	Martinez-Flores, R., Haldar, A., and Katkhuda, H., "Structural Health Assessment After an Impact," Paper No. IMECE 2006-13718, American Society of Mechanical Engineering, 2006.

11.	Hadid, H. and Katkhuda H., "Wind Load Analysis of Cantilever Cylindrical Tanks with Variable Thickness", 4th Jordanian Civil Engineering Conference, 28-30 March, 2006, Amman, Jordan,

12.	Haldar, A., Martinez-Flores, R., and Katkhuda, H., "Structural Health Assessment Using Minimum Information under Uncertainty," Keynote Lecture, Structural Engineering Convention, Indian Institute of Science, Bangalore, India, pp. 57-71, December, 2005.

13.	Katkhuda, H., Haldar, A., and Flores, R.M., “System Identification Under Uncertainty,” 9th International Conference On Structural Safety And Reliability (ICOSSAR'05), June, 2005.

14.	Flores, R.M., Haldar, A., and Katkhuda, H., “Experimental Verification of a Structural Health Assessment Technique,” 9th International Conference on Structural Safety and Reliability (ICOSSAR'05), June, 2005.

15.	Katkhuda, H., and Haldar, A., "Defect Detection At Local Level Using Sub-Structure Model With Unknown Input Excitation," 9th ASCE EMD/SEI/GI/AD Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, Albuquerque, New Mexico, July 26-28, 2004, (CD-ROM).

16.	Katkhuda, H., Martinez, R. F., and Haldar, A., "Stiffness Identification Under Uncertain Blast Loading," Third International Symposium on Uncertainty Modeling and Analysis, University of Maryland, College Park, Maryland, September 21-24, 2003, pp. 22-27.

Book Chapters:

1.	Katkhuda, H., and Haldar, A., "Chapter 13- Structural Health Assessment Under Uncertainty", Recent Developments in Reliability-Based Civil Engineering, edited by A. Haldar, World Scientific Publishing Co., 2006. 

2.	Katkhuda, H., and Haldar, A., "Chapter 21 - System Identification at Local Level under Uncertainty", Applied Research In Uncertainty Modeling And Analysis, Edited by N. O. Attoh-Okine and B.M. Ayyub, Springer Science Publishers, New York, pp. 461-490, 2005.

Advisor:
1. Effect of 3D, 4D, 5D Steel Fibers on the Flexural Behavior of Reinforced Concrete Beams. 

2. Effect of 3D, 4D, 5D Steel Fibers on the Shear Behavior of Reinforced Concrete Beams.
 
3. Effect of 3D, 4D, 5D Steel Fibers on the Shear Behavior of Reinforced Concrete Beams 
Made of Recycled Coarse Aggregate. 

4. Rehabilitation And Strengthening The Flexural Capacity Of Lightweight Reinforced Concrete Beams Using Near-Surface Mounted Carbon Fiber Reinforced Polymer [NSM-CFRP ] Strips. 

5. Effect of drop beam on the punching shear strength of flat slabs. 

 Co-advisor:

1- Flexural Behavior of RC One Way Hollow-Core And Solid Slabs Using Lightweight Aggregate Concrete And a Top Layer Of Ultra-High Performance Concrete (on going). 

2- Shear behavior of composite reinforced concrete beams with light weight aggregate concrete core and ultra-high performance concrete skin (on going).

3- Flexural behavior of composite RC beams using lightweight aggregate concrete and ultra-high-performance concrete skin (on going). 

4- Flexural Strengthening and Rehabilitation of Reinforced Concrete T-Beams Using External Carbon Fiber Reinforced Polymers (completed). 

5- Shear Strengthening and Rehabilitation of Reinforced Concrete T-Beams Using Externally Carbon Fiber Reinforced Polymer (completed). 

6- Flexural Strengthening of Reinforced Concrete Beams with Variable Compressive Strength using Near Surface Mounted Carbon Fiber Reinforced Polymer Strips (completed). 

7- Effect of Basalt Stirrups on the Shear Behavior of Beams Reinforced with BFRP Bars (completed).

 Experience

10/2023- Present   Professor, Dean of Faculty of Engineering, The Hashemite University, Zarqa, Jordan.

9/2020-Present    Professor, Department of Civil Engineering, The Hashemite University, Zarqa, Jordan.

9/2018- 9/2020	Professor, Department Head of Civil Engineering, The Hashemite University, Zarqa, Jordan.

2/2018- 9/2018	Professor, Department of Civil Engineering, The Hashemite University, Zarqa, Jordan.

5/2011- 2/2018	Associate Professor, Department of Civil Engineering, The Hashemite University, Zarqa, Jordan.

9/2012-9/2014 	Sabbatical and unpaid leave from The Hashemite University, Zarqa, Jordan.
 
9/2012-9/2014 	Founding Chair of Civil and Infrastructure Engineering Department, American University of Ras AlKhaimah (AURAK), Ras AlKhaimah, UAE; And Advisor to the president for campus development

2/2005-5/2011	Assistant Professor, Department of Civil Engineering, The Hashemite University, Zarqa, Jordan

8/2001-12/2004	Department of Civil Engineering and Engineering Mechanics, The University of Arizona, Tucson.

- Statics
- Strength of Materials
- Strength of Materilas Lab.
- Engineering Drawings (AutoCad)
- Engineering Drawings (Manual)
- Structure Analysis  
- Steel Design 
- Computer Application in Structural Engineering
- Introduction to Finite Element
- Advanced Dynamics of Structures.
- Graduation Projects.
- Master Thesis Supervision.

 1- Editor for Jordan Journal for Civil Engineering.
 2- Committee member for research funding for engineering field in Ministry of Higher Education Jordan

 Committees:

-Member in committee for research funding in Ministry of Higher Education Jordan.
-Member in committee for certificate equivalency for the non-Jordanian certificates.
- Member in Jordan Association Engineers.
- Member in reviewing committee of the Jordanian code for steel structures (LRFD).
- Member in the scientific committee of the International Earthquake Engineering Conference (TINEE) held in Dead sea, Jordan.
- Member in the scientific committee of workshop for seismicity of Jordan and adjacent areas held in Amman, Jordan.
- Member in reviewing committee of the Jordanian code for green buildings.
- Member in committee of improving the structural work in Jordan.

HASAN NABIL MOH'D KATKHUDA

HASAN NABIL MOH'D KATKHUDA

Welcome to the Hashemite University faculty staff website.